banner



How To Make A Paper Bag Puppet Animal

Download Commodity

Download Article

Kids a little bored? Accept them make a paper pocketbook puppet and put on a puppet show for you! They volition have enough of fun. Even better if you lot bring together them!

  1. ane

    Lay the paper bag on its smooth side. Go on the bottom flap facing up. Point the opening toward you.

  2. two

    Depict the lips. Describe the upper lip on the flap, forth its lower edge. Then describe the lower lip on the body of the bag, where the edge of the flap meets it. Employ the unabridged width of the flap to create an exaggerated oral fissure if desired, or a smaller one in proportion to the other facial features.

    Advertisement

  3. 3

    Draw the confront. Apply pencils, pens, crayons, and/or markers to draw outlines for the facial features (nose, eyes, eyebrows, and ears, every bit well as hair if desired).Then color them in.

  4. iv

    Describe the inside of the rima oris. Open up the flap. Be conscientious non to smoothen out any creases. Draw the tongue beneath the crease that yous notice under the flap. Add the pharynx and uvula above the crease if desired.

    • Alternately, you tin can cut out a small pigsty hither broad enough for your finger and utilise that as your tongue.
  5. 5

    Fill in the body. Excluding the flap, apply the lower three-quarters of the handbag'south trunk to design your puppet'southward trunk.[1] For people, outline clothes and color them in. For animals, outline their color design then color in.

  6. half-dozen

    Use your puppet. Slide your hand into the opening. Curl your fingers upwards and nether the flap. Extend and curl your fingers to make your puppet "talk."

  7. Advertisement

  1. i

    Color your bag. Outline your puppet'south pattern in pencil on the handbag. Colour in the areas either by painting them or by gluing cutouts of colored construction newspaper to the bag.[two]

    • For animal puppets of reptiles and fish, utilize cutouts from various colors of construction paper to create multicolored scales.
    • For birds, make cutouts of feathers from structure paper. Glue them to the bag in layers, starting at the lesser of the bag, with each added row slightly overlapping the one underneath it for a more textured effect.
  2. 2

    Use alternating materials for facial features. Glue a pair of googly eyes to the bag instead.[3] With a steady hand, outline the bag's lips with mucilage and then pigment or ink them for added dimension in one case the mucilage has stale. For the nose, create a glue outline and color it in as you lot did with the lips, or mucilage either an appropriately sized pompom[4] or a small slice of putty sculpted into a nose to the bag.

  3. three

    Give your puppet some extra bite. Utilise a sail of white construction paper to make a cutout of teeth.

    • For the upper row, add a half-inch of extra space along the top. Once you cut it out, apply glue along the superlative with your cutout facing upwards. Then stick it underneath the bottom of the flap.
    • For the bottom row, employ glue to the back of the cutout. Fix it to the torso of the bag. As desired, either fit it in place so the upper row and bottom row see when the mouth is closed, or hide information technology underneath the upper row and the bottom of the flap to create an overbite.
  4. four

    Add together pilus. Cut yarn into strips of any desired length. Glue the ends to the top of the bag's flap. Use strips of ribbon to necktie the yarn into pigtails or braids.[5]

    • Use yarn to make mustaches and beards as well.
    • For spiky or crazier hair, employ colored pipage cleaners instead.
    • For brute puppets of mammals, employ layers of yarn to create fur. Cut strips of desired length and glue them to the body of the handbag. Starting time your first row along the lesser of the bag rather than the superlative in order to avoid having to lift layers of yarn to glue underneath them, which might make a mess. Apply colored pipe cleaners for whiskers.
  5. five

    Create clothing. Glue textile swatches onto the bag. If desired, crease or pleat them beforehand for extra dimension. And then gum strips of ribbon along the collar for an eye-communicable trim.[vi]

  6. Advertisement

  1. i

    Add ears. Using a stiff sheet of structure paper, outline each ear with pencil. Outline an extra strip to each ear, most a one-half-inch wide, where the ear volition connect to the head. Cut the ears out with scissors. So, with each ear facing up, apply glue along the extra strip and stick that to the back of the bag, behind the flap.

  2. 2

    Make legs. Apply a stiff canvas of construction paper or thin cardboard for more durability. Blueprint a pair of legs with pencil. Allow actress length at the summit to use as a glue tab afterwards on. Cut the legs out with scissors and so, depending on the materials yous've used for the bag itself, use paint, construction paper, and/or cloth swatches to friction match your puppet'due south skin and/or wear. Then, with the legs facing up, apply mucilage to the actress length on peak. Glue the legs to the inside of your boob, underneath the front of the bag, so they dangle out of the opening and in front of your own arm when you're wearing the boob.

    • Since the legs volition dangle out of the opening, be gentle with your manus every bit you slip it in or out of the puppet.
  3. iii

    Create arms. Use a stiff sheet of construction paper or thin cardboard. Outline each arm separately with pencil. Permit extra length at the end of each, at the "shoulder," where it will connect to the puppet. Cutting each arm out. Depending on the materials you lot've used for the bag itself, use paint, construction paper, and/or fabric swatches to friction match the arms to the puppet'due south pattern. With each arm facing up, apply glue to the extra length at the shoulder and stick the gum tab to the back of the bag.

    • To manipulate the arms, trace a 2nd cutout for each arm in one case y'all've cut out the outset: a front-side and a back-side. Glue the two together, leaving a small gap at or below the wrist. Fold the arm where its elbow should exist to create a crease. Then insert the thin terminate of a chopstick (or a similarly long and tapered object, like a sharpened pencil) into the gap by the wrist. Manipulate the chopstick to bend and extend the arm.
    • For bird puppets, use the same method to create wings.
    • For fish puppets, utilise the same method to create lateral fins.
  4. 4

    Add a tail. Utilise a potent sheet of structure paper or thin cardboard. Outline your tail with pencil, allowing extra length at the terminate where it will see the body. Once you lot cut it out, crease the actress length to create a gum tab. Depending on the materials you've used for the bag itself, utilize pigment, yarn, or construction paper to friction match the tail to the puppet'southward blueprint. Apply gum and stick the glue tab to the back of the body.

    • For a more durable tail, trace your kickoff cutout on more than construction paper or paper-thin to create a second cutout. Glue the ii together except for the actress length at the finish where they will meet the body. Then crease the extra lengths in opposite directions, utilise glue to each, and fix the tail to the back of the body.
    • For fish puppets, utilize the same method to create a dorsal fin.
  5. Advertising

Add New Question

  • Question

    What if yous want to make construction wearable?

    Undertale4141

    Undertale4141

    Height Answerer

    Go ahead! Every puppet is unique and y'all tin can do any yous want with yours.

  • Question

    How can I make a drawing character?

    Undertale4141

    Undertale4141

    Summit Answerer

    Just blueprint the confront and apparel to exist similar to those of the character. Y'all might want to use a pic for reference.

  • Question

    Tin you make the puppet without hair?

    Qamar

    Yes, feel gratuitous to design your puppet any way you choose.

Show more answers

Advertisement

Video

  • Add different kinds and colors of yarn for hair.

  • Go on the bag's creases sharp during structure and between uses and then you tin nonetheless manipulate the puppet easily.

  • Search online for free pre-fabricated, printable templates for pop characters and animals.

  • Cut out holes on the sides and put your baby finger and thumb in at that place as hands.

  • Take fun past putting on a puppet show for someone. Sit behind a couch or another alpine object and lift the puppets over the top of the couch. Make them dance, sing, tell jokes, or put on a play.

Thanks for submitting a tip for review!

Advertisement

  • If you are doing this project with children, use washable markers. If yous use non-washable markers, put downwardly newspaper then the kids don't make a mess.

Advertisement

Things You'll Demand

  • As many newspaper numberless as there are kids participating
  • Crayons, markers, colored pencils, paint, etc.
  • Structure paper
  • Mucilage
  • Yarn
  • Googly eyes or buttons
  • Fabric scraps
  • Scissors

Virtually This Commodity

Thanks to all authors for creating a page that has been read 317,363 times.

Did this commodity help you?

Source: https://www.wikihow.com/Make-a-Paper-Bag-Puppet

Posted by: feltthook1983.blogspot.com

0 Response to "How To Make A Paper Bag Puppet Animal"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel